Today I have an easy DIY using leaves from the Dollar Store to make a really cute bowl.
I have seen this DIY about 847 times on Pinterest, but I thought that I would add my version to the mix. lol. You can follow me on Pinterest and see all the craziness that I pin. It is so quick and easy, the longest part is waiting for it to dry…
- Mod Podge, foam brush, cling wrap
Find a bowl that you can use for the mold. We have had this bowl for over 20 years, in fact Dear Hubby had it when we got married. When I first saw it I mentioned to him that it was a great bowl (it is one in a set of 3) and he said “Thanks, I got it at Ace Hardware when I was getting some tools.” lol. Such a man thing to do. Anyway, the bowls are awesome and have held up great! So I thought it would be a perfect mold. I think I should use the other 2 bowls and make a set of 3 leaf bowls, that would be so cute!
Next wrap cling wrap to the bowl to protect it
Then start adding mod podge and leaves. I used glossy mod podge because that is what I had, but mat would work great as well. Make sure everything is well covered.
Once everything is covered add some cling wrap to the top to help keep everything in place as is dries. It does take a while to dry, but eventually it will dry
Once it is completely dry slowly, and carefully peal off the cling wrap. And there you go a brand new leaf bowl that is perfect for Halloween, Thanksgiving, or Fall. It is a little fragile and not the sturdiest bowl, but it is perfect for candy or pine cones or pumpkins, any light weight decor is perfect.
The post DIY Leaf Bowl From Dollar Store Leaves appeared first on Take Time To Create.
Another day in Oct and another Halloween Craft. This time it is some DIY jewelry. This is perfect for people who want to celebrate Halloween without going for the full blown costume. You can wear this at work or school without going over the top and it is easy to take off if needed.
This is an easy project that looks so cute when you are done. First find some plastic Skeleton Garland. I found mine at the Dollar Store.
Then take it apart. I used different piece for different types jewelry and hair clips.
I used the arms and legs from 1 skeleton to make hair clips. Just cut off the arms and legs and hot glue them to an alligator clip.
For the bracelet cut off some arms and legs, then punch a hole near the top. I used a needle punch, then I added jump rings to connect the pieces. Add a clasp and you are done.
I make a pair of skull earrings by adding jump rings and a french hook. Easy to do, and so cute when completed.
For the necklace I just added a jump ring to the top of a whole skeleton. I also made a necklace out of just the head.
I also made a hair clip out of a whole skeleton. This one was fun to wear.
The skeletons made great jewelry and hair clips, they were fun to take apart and reassemble in new ways. And since they are light weight they are easy to wear for long periods of time. These are great for almost anyone to celebrate Halloween or for anytime when they want to wear skulls and skeletons.
The post DIY Skeleton Jewelry and Hair Clips appeared first on Take Time To Create
Update: Check it out this post has been added to Fun Family Crafts!!!
One of the best ways to spruce up your desk is to add some custom DIY erasers. They are so easy to do and they look so cute on your desk at work or school. They also make perfect gifts, or they would be tons of fun to make at a party.
There are affiliate links below
- Eraser Clay (I found this one on line at Amazon, but there are different brands, so pick one that works for you)
- Molds (I used ice cube trays from the Dollar Store, or you can free form your designs)
The first thing you do is knead your clay. You want to warm it up and make it pliable and easy to work with.
Once the clay is easy to work with then press it into a mold you like. ( I used a mold because shaping things out of clay is not the easiest thing for me. Molds just made the process a lot easier) You can make almost anything out of the clay. It is really easy to work with.
Once you have your design pop it out of the mold. I just put a little on the bottom of the mold then I popped it out and added a layer on the bottom of the design to smooth out the bottom. You can also add enough clay to fill the whole mold. It does make a larger eraser, but it looks really cool. You can layer colors or mix them to make a new color. There are so many possibilites.
Bake the erasers according to the directions and let them fully cool before using.
They actually work. When I first got this product I thought they might be a little gimmicky and not work well, but I was pleasantly mistaken they actually work really well!
They turned out so cute I think I might need to make more for every holiday!
The Post DIY Halloween Erasers appeared first on Take Time To Create.
I hope your October is going well! I can’t believe how fast it is flying by! In fact the whole year is going too fast.
To celebrate everything pumpkin I made this easy, diy faux stone pumpkins.
- Pumpkins ( I used ceramic ones from the dollar store, but almost any pumpkin will work)
- Spray Paint Primer
- Rust-oleum stone spray paint
After cleaning your pumpkin and protecting your work surface spray a coat of primer on all the pumpkins on all sides
Now it is time to paint. Have you seen this faux stone spray paint? It is awesome! I have a feeling that everything will become faux stone. The texture and look changes the closed you get to your project. It is a versatile tool that I have a feeling I will be using a lot in the future.
For 1 pumpkin I wanted to to use the darker color so I sprayed a base of oil rubbed bronze before the stone.
Then go to town painting the pumpkins. I did add a layer of the lighter color to the darker pumpkin because it was not matching well. But just keep going and paint layers according to the directions until you are happy with the results. I am thrilled with how they turned out! So very cute
If you want you can spray a sealer over the top to protect them. I think these would look really cute outside as part of your outdoor decorations. Just be sure to protect them first.
And here they are as part of my DIY Painted Halloween Village display. I think they added a nice touch to the display.
Halloween is fast approaching, and of course I get it in my head that I want to do some new Halloween decor. At least this year I am getting it done before Halloween and not after, haha.
I saw a Halloween Village at the Dollar Store and thought it would be perfect to paint for Halloween
- Ceramic houses (I found mine at the Dollar Store, but there are a lot of options out there. You could even use Christmas houses)
- Metallic Paint
- Brushes, Stucco, Beads
When I saw these houses I thought that they were very cute, but the colors were not great. I didn’t think that they went together very well and the figurines were terrible.
Before the painting fun I had to prep the houses. I cleaned them then added a layer of Stucco to the roofs and anywhere there needed to be a rough detail. Then I added some beads to the grass area.
After the texture was dry I added a layer of black gesso. This gave me a blank canvas to work on. I did have to go back and touch up areas that I missed.
After the gesso was dry it was time for the fun painting! I used metallic acrylic paint and I mixed some Mica Powder with soft gloss gel for the green. I just dry brushed the colors onto the housed, adding and blending as I went. Once I was happy with the look I went on to the next house, until I was finished with the project.
Here is an up close picture of the detail of one of the houses and the bridge.
And here it is on display in my home. I really liked this project, it was fun to watch the housed change right before my eyes. Good thing I bought more houses from the Dollar Store, now I can create even more villages, haha
Halloween is fast approaching so I thought it would be fun to do an easy Halloween DIY. I have been doing a lot of mixed media projects that take a long time so easy was right up my alley. The glitter that I added is hard to see, but trust me when I say that they are so cute. This was a fun and easy way to spice up a dollar store paper lantern.
This is such an easy project, let’s get started.
~ Paper lantern (I got mine from the dollar store, I thought the cat design was really cute)
~ Sitckles or White glue and glitter
This lantern was so cute I couldn’t pass it up, but it was lacking in the glitter department, so I decided to help it. I don’t know if you can see, but it is nice and plain, and not glittery. But not for long!
The first one I did was with Sickles. I just outlined the cat with black glitter Stickles and that made it so much cuter. Stickles are great, I used them for almost everything. Such and easy was to add glitter, and relatively mess free.
The second one I wanted to see if glitter would look just as cute, and it did! Just take white glue and spread it in sections on the cat and pour black glitter on it.
I loved how they turned out! When they are lit you can’t see the shiny, glitter as well. But this way they look sparkly even in the day time.
Fall Mason Jars
With Halloween right around the corner (I can’t believe it, but with October almost here, the year will be wrapping up pretty quickly) I know that I need to get started on my Halloween decorations.
So, I was wandering around my local big box hardware store and I saw these really cute witches’ hats and I thought it would be the perfect decoration for my porch. But I looked at the price and thought I could make one for cheaper than that (it was almost $4 for a hat that was about 4 inches in height) Here is a picture of the hat I found:
So off to my local dollar store to see what I could find. I found a party hat and some Halloween garland, perfect!
So I cut out a circle (with a dinner plate as a guide) and glued this to the bottom of the hat. This made the brim.
Then I smeared mod podge on the hat and started wrapping the garland around the hat. (I should make a note here, the garland came with little ghosts and skulls sticking out of the garland. I chose to cut them off, it made the hat too “busy” and not the look I was going for. So now I have a pile of ghosts and skulls that I am sure I will find something to do with soon. )
I wrapped garland all around the hat and brim. Then I added a contrasting garland color the bottom of the hat, just for a fun detail. That’s it, not much to it.
In all it cost me about $4, so no real savings, but it was much larger than the little hat I found at the store. And they were selling bigger hats for about $8, so that is a savings.
Finished hat! Doesn’t it look cute. I can’t wait to make more and line them up on my porch. Thoughts? Do you have a hat that you want to share? I would love to see it!
- I think I could make this with a tomato cage
- Wait for the end of the holiday for the sales and make them for next year.
- I used craft glue for gluing the brim on and the detail garland, but I am sure most any type of glue would work.
What else can I make? How about Christmas trees? The sky is the limit.